forked/libnfc
1
0
Fork 0
mirror of https://github.com/nfc-tools/libnfc.git synced 2025-12-23 18:50:05 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add Raspberry Pi OS version change notice and official documentation links

Browse Source
This commit is contained in:
Reinhart Previano Koentjoro 2024-06-05 17:15:05 +07:00 committed by Romuald Conty
parent b7bec39cd4
commit 3379466e33
3 changed files with 29 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
contrib/libnfc/pn532_uart_on_rpi.conf.sample
View File

@ -1,5 +1,9 @@
## Typical configuration file for PN532 device on R-Pi connected using UART
## Note: to use UART port on R-Pi, you have to disable linux serial console:
## http://learn.adafruit.com/adafruit-nfc-rfid-on-raspberry-pi/freeing-uart-on-the-pi
##
## For more information about UART differences between R-Pi models, visit:
## https://www.raspberrypi.com/documentation/computers/configuration.html#configure-uarts
##
name = "PN532 board via UART"
connstring = pn532_uart:/dev/ttyAMA0

14
contrib/libnfc/pn532_uart_on_rpi_3.conf.sample
View File

@ -4,19 +4,27 @@
## use the PN532 device with the "mini UART", which is still hijacked by the linux kernel
## as a serial console
##
## For more information about UART differences between R-Pi models, visit:
## https://www.raspberrypi.com/documentation/computers/configuration.html#configure-uarts
##
## Tested recipe with PN532 breakout from Adafruit
##
## To enable uart on GPIO, add this line to bottom of /boot/config.txt
## To enable uart on GPIO, add this line to bottom of /boot/firmware/config.txt
## enable_uart=1
##
## If you are using an earlier version of Raspberry Pi OS (prior to Bookworm),
## the config file is available instead on /boot/config.txt.
##
## Stop and disable serial console:
## $ sudo systemctl stop serial-getty@ttyS0.service
## $ sudo systemctl disable serial-getty@ttyS0.service
##
## Remove console from /boot/cmdline.txt by removing:
## Remove console from /boot/firmware/cmdline.txt by removing:
## console=serial0,115200 Save and reboot for changes to take effect.
##
## If you are using an earlier version of Raspberry Pi OS (prior to Bookworm),
## the config file is available instead on /boot/cmdline.txt.
##
name = "PN532 board via UART"
connstring = pn532_uart:/dev/ttyS0
allow_intrusive_scan = true

27
contrib/libnfc/pn532_uart_on_rpi_5.conf.sample
View File

@ -1,21 +1,22 @@
## Typical configuration file for PN532 device on R-Pi 5 connected using miniUART
## Note: Changes have been made to R-Pi 5 with the removal of the /dev/ttyS0 address
## in favor of /dev/ttyAMA0. Additionally, the /boot/cmdline.txt has been replaced
## with /boot/firmware/cmdline.txt.
## Typical configuration file for PN532 device on R-Pi 5
## Note: Changes have been made to R-Pi 5 with the removal of the mini UART
## (/dev/ttyS0), hence the module can be accessed through the original R-Pi
## UART address (/dev/ttyAMA0).
##
## Tested recipe with generic PN532 module (common clones of the Elechouse module)
## For more information about UART differences between R-Pi models, visit:
## https://www.raspberrypi.com/documentation/computers/configuration.html#configure-uarts
##
## To enable uart on GPIO, add this line to bottom of /boot/config.txt
## This configuration is almost identical to pn532_uart_on_rpi.conf.sample
## except the allow_intrusive_scan option from the R-Pi 3 sample.
##
## Tested recipe with generic PN532 module (common Elechouse module clones)
##
## To enable uart on GPIO, add this line to bottom of /boot/firmware/config.txt
## enable_uart=1
##
## Stop and disable serial console:
## $ sudo systemctl stop serial-getty@ttyAMA0.service
## $ sudo systemctl disable serial-getty@ttyAMA0.service
##
## Remove console from /boot/firmware/cmdline.txt by removing:
## console=serial0,115200 Save and reboot for changes to take effect.
## If you are using an earlier version of Raspberry Pi OS (prior to Bookworm),
## the config file is available instead on /boot/config.txt.
##
name = "PN532 board via UART"
connstring = pn532_uart:/dev/ttyAMA0
allow_intrusive_scan = true