forked/libnfc
1
0
Fork 0
mirror of https://github.com/nfc-tools/libnfc.git synced 2026-02-18 02:55:49 +00:00
Code Issues Packages Projects Releases Wiki Activity

Create sample config for Raspberry Pi 5

Browse Source
This commit is contained in:
Reinhart Previano Koentjoro 2024-06-05 16:47:01 +07:00 committed by Romuald Conty
parent 0e8cd450e1
commit b7bec39cd4
1 changed files with 21 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
contrib/libnfc/pn532_uart_on_rpi_5.conf.sample Normal file
View File

@ -0,0 +1,21 @@
## Typical configuration file for PN532 device on R-Pi 5 connected using miniUART
## Note: Changes have been made to R-Pi 5 with the removal of the /dev/ttyS0 address
## in favor of /dev/ttyAMA0. Additionally, the /boot/cmdline.txt has been replaced
## with /boot/firmware/cmdline.txt.
##
## Tested recipe with generic PN532 module (common clones of the Elechouse module)
##
## To enable uart on GPIO, add this line to bottom of /boot/config.txt
## enable_uart=1
##
## Stop and disable serial console:
## $ sudo systemctl stop serial-getty@ttyAMA0.service
## $ sudo systemctl disable serial-getty@ttyAMA0.service
##
## Remove console from /boot/firmware/cmdline.txt by removing:
## console=serial0,115200 Save and reboot for changes to take effect.
##
name = "PN532 board via UART"
connstring = pn532_uart:/dev/ttyAMA0
allow_intrusive_scan = true