diff --git a/README.md b/README.md
index 1778cc1..7c656cf 100644
--- a/README.md
+++ b/README.md
@@ -13,11 +13,11 @@
|----------|---------------|-------------------|
| Multithreaded JPEG encoding |  Yes |  No |
| [OpenMAX IL](https://www.khronos.org/openmaxil) hardware acceleration
on Raspberry Pi |  Yes |  No |
-| Behavior when the device
is disconnected while streaming |  Shows a black screen
with ```NO SIGNAL``` on it
until reconnected |  Stops the broadcast 1 |
+| Behavior when the device
is disconnected while streaming |  Shows a black screen
with ```NO SIGNAL``` on it
until reconnected |  Stops the streaming 1 |
| [DV-timings](https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dv-timings.html) support -
the ability to change resolution
on the fly by source signal |  Yes |  Partially yes 1 |
| Option to skip frames when streaming
static images by HTTP to save the traffic |  Yes 2 |  No |
| Streaming via UNIX domain socket |  Yes |  No |
-| Debug logs without recompiling,
performance statistics log,
access to HTTP broadcast parameters |  Yes |  No |
+| Debug logs without recompiling,
performance statistics log,
access to HTTP streaming parameters |  Yes |  No |
| Option to serve files
with a built-in HTTP server |  Yes |  Regular files only |
| Signaling about the stream state to GPIO
on Raspberry Pi using [wiringPi](http://wiringpi.com) |  Yes |  No |
| Access to webcam controls (focus, servos)
and settings such as brightness via HTTP |  No |  Yes |
@@ -25,7 +25,7 @@
Footnotes:
* ```1``` Long before µStreamer, I made a [patch](https://github.com/jacksonliam/mjpg-streamer/pull/164) to add DV-timings support to mjpg-streamer and to keep it from hanging up no device disconnection. Alas, the patch is far from perfect and I can't guarantee it will work every time - mjpg-streamer's source code is very complicated and its structure is hard to understand. With this in mind, along with needing multithreading and JPEG hardware acceleration in the future, I decided to make my own stream server from scratch instead of supporting legacy code.
- * ```2``` This feature allows to cut down outgoing traffic several-fold when broadcasting HDMI, but it increases CPU usage a little bit. The idea is that HDMI is a fully digital interface and each captured frame can be identical to the previous one byte-wise. There's no need to broadcast the same image over the net several times a second. With the `--drop-same-frames=20` option enabled, µStreamer will drop all the matching frames (with a limit of 20 in a row). Each new frame is matched with the previous one first by length, then using ```memcmp()```.
+ * ```2``` This feature allows to cut down outgoing traffic several-fold when streaming HDMI, but it increases CPU usage a little bit. The idea is that HDMI is a fully digital interface and each captured frame can be identical to the previous one byte-wise. There's no need to stream the same image over the net several times a second. With the `--drop-same-frames=20` option enabled, µStreamer will drop all the matching frames (with a limit of 20 in a row). Each new frame is matched with the previous one first by length, then using ```memcmp()```.
-----
# TL;DR
@@ -36,7 +36,7 @@ If you're going to live-stream from your backyard webcam and need to control it,
You'll need ```make```, ```gcc```, ```libevent``` with ```pthreads``` support, ```libjpeg8```/```libjpeg-turbo```, ```libuuid``` and ```libbsd``` (only for Linux).
* Arch: `sudo pacman -S libevent libjpeg-turbo libutil-linux libbsd`.
-* Raspbian: `sudo apt install libevent-dev libjpeg8-dev uuid-dev libbsd-dev`.
+* Raspbian: `sudo apt install libevent-dev libjpeg8-dev uuid-dev libbsd-dev`. Add `libraspberrypi-dev` for `WITH_OMX=1` and `wiringpi` for `WITH_GPIO=`.
* Debian: `sudo apt install build-essential libevent-dev libjpeg62-turbo-dev uuid-dev libbsd-dev`.
On Raspberry Pi you can build the program with OpenMAX IL. To do this pass option ```WITH_OMX=1``` to ```make```. To enable GPIO support install [wiringPi](http://wiringpi.com) and pass option ```WITH_GPIO=1```. If the compiler reports about a missing function ```pthread_get_name_np()``` (or similar), add option ```WITH_PTHREAD_NP=0``` (it's enabled by default). For the similar error with ```setproctitle()``` add option ```WITH_SETPROCTITLE=0```.
@@ -53,7 +53,7 @@ FreeBSD port: https://www.freshports.org/multimedia/ustreamer.
-----
# Usage
-Without arguments, ```ustreamer``` will try to open ```/dev/video0``` with 640x480 resolution and start broadcasting on ```http://127.0.0.1:8080```. You can override this behavior using parameters ```--device```, ```--host``` and ```--port```. For example, to broadcast to the world, run:
+Without arguments, ```ustreamer``` will try to open ```/dev/video0``` with 640x480 resolution and start streaming on ```http://127.0.0.1:8080```. You can override this behavior using parameters ```--device```, ```--host``` and ```--port```. For example, to stream to the world, run:
```
# ./ustreamer --device=/dev/video1 --host=0.0.0.0 --port=80
```