Merge pull request #94 from Drachenkaetzchen/patch-1

Give V4L2_PIX_FMT_MJPEG an unique name

README.md

@@ -77,6 +77,24 @@ $ ./ustreamer \
 
 You can always view the full list of options with ```ustreamer --help```.
 
+-----
+# Raspberry Pi Camera Example
+
+Example usage for the Raspberry Pi v1 camera:
+
+```bash
+$ sudo modprobe bcm2835-v4l2
+$ ./ustreamer --host :: -m jpeg --device-timeout=5 --buffers=3 -r 2592x1944
+```
+
+:exclamation: Please note that newer camera models have a different maximum resolution. You can see the supported resolutions at the [PiCamera documentation](https://picamera.readthedocs.io/en/release-1.13/fov.html#sensor-modes)
+
+:exclamation: If you get a poor framerate, it could be that the camera is switched to photo mode, which produces a low framerate (but a higher quality picture). This is because `bcm2835-v4l2` switches to photo mode at resolutions higher than `1280x720`. To work around this, pass the `max_video_width` and `max_video_height` module parameters like so:
+
+```bash
+$ modprobe bcm2835-v4l2 max_video_width=2592 max_video_height=1944
+```
+
 -----
 # See also
 * [Running uStreamer via systemd service](https://github.com/pikvm/ustreamer/issues/16).

src/ustreamer/device.c

@@ -41,7 +41,7 @@ static const struct {
 	{"UYVY",	V4L2_PIX_FMT_UYVY},
 	{"RGB565",	V4L2_PIX_FMT_RGB565},
 	{"RGB24",	V4L2_PIX_FMT_RGB24},
-	{"JPEG",	V4L2_PIX_FMT_MJPEG},
+	{"MJPEG",	V4L2_PIX_FMT_MJPEG},
 	{"JPEG",	V4L2_PIX_FMT_JPEG},
 };
 

src/ustreamer/device.h

@@ -64,7 +64,7 @@
 #define STANDARDS_STR		"PAL, NTSC, SECAM"
 
 #define FORMAT_UNKNOWN	-1
-#define FORMATS_STR		"YUYV, UYVY, RGB565, RGB24, JPEG"
+#define FORMATS_STR		"YUYV, UYVY, RGB565, RGB24, MJPEG, JPEG"
 
 #define IO_METHOD_UNKNOWN	-1
 #define IO_METHODS_STR		"MMAP, USERPTR"