Bump version: 5.24 → 5.25

* Support multiple (audio+video) streams in demo janus client (#4)

* Support multiple (audio+video) streams in demo janus client

* Adjust wording in H264 guide

* Use consistent braces style

Co-authored-by: Louis Goessling <louis@goessling.com>

.bumpversion.cfg

@@ -1,7 +1,7 @@
 [bumpversion]
 commit = True
 tag = True
-current_version = 5.24
+current_version = 5.25
 parse = (?P<major>\d+)\.(?P<minor>\d+)
 serialize = 
 	{major}.{minor}

.github/workflows/docker-alpine-image.yaml

@@ -59,8 +59,8 @@ jobs:
       -
         name: Test
         run: |
-          echo version: $(docker run --rm -e NO_EDID=1 -t ustreamer --version)
-          echo -e "features:\n$(docker run --rm -e NO_EDID=1 -t ustreamer --features)"
+          echo version: $(docker run --rm -t ustreamer --version)
+          echo -e "features:\n$(docker run --rm -t ustreamer --features)"
       -
         name: Build multi arch
         uses: docker/build-push-action@v3

README.md

@@ -81,35 +81,57 @@ $ ./ustreamer \
 
 You can always view the full list of options with ```ustreamer --help```.
 
+-----
 # Docker (Raspberry Pi 4 HDMI)
-## Preparations
 
+## Preparations
 Add following lines to /boot/firmware/usercfg.txt:
+
 ```
 gpu_mem=128
 dtoverlay=tc358743
 ```
+
 Check size of CMA:
+
 ```bash
 $ dmesg | grep cma-reserved
 [    0.000000] Memory: 7700524K/8244224K available (11772K kernel code, 1278K rwdata, 4320K rodata, 4096K init, 1077K bss, 281556K reserved, 262144K cma-reserved)
 ```
+
 If it is smaller than 128M add following to /boot/firmware/cmdline.txt:
+
 ```
 cma=128M
 ```
+
 Save changes and reboot.
+
 ## Launch
 Start container:
+
 ```bash
-$ docker run --device /dev/video0:/dev/video0 -p 8080:8080 pikvm/ustreamer:latest
+$ docker run --device /dev/video0:/dev/video0 -e EDID=1 -p 8080:8080 pikvm/ustreamer:latest
 ```
+
 Then access the web interface at port 8080 (e.g. http://raspberrypi.local:8080).
+
+## Custom config
+```bash
+$ docker run --rm pikvm/ustreamer:latest \
+    --format=uyvy \
+    --workers=3 \
+    --persistent \
+    --dv-timings \
+    --drop-same-frames=30
+```
+
 ## EDID
-Container will set HDMI EDID before starging ustreamer. Use `-e NO_EDID=1` to not set EDID. Use `-e EDID_HEX=xx` to specify custom EDID data.
+Add `-e EDID=1` to set HDMI EDID before starging ustreamer. Use together with `-e EDID_HEX=xx` to specify custom EDID data.
 
 -----
 # Raspberry Pi Camera Example
+
 Example usage for the Raspberry Pi v1 camera:
 ```bash
 $ sudo modprobe bcm2835-v4l2

docs/h264.md

@@ -78,6 +78,17 @@ memsink: {
 EOF
 ```
 
+If you're using a TC358743-based video capture device that supports audio capture, run the following command to enable audio streaming:
+
+```sh
+cat << EOF >> /opt/janus/lib/janus/configs/janus.plugin.ustreamer.jcfg
+audio: {
+    device = "hw:1"
+    tc358743 = "/dev/video0"
+}
+EOF
+```
+
 ### Start µStreamer and the Janus WebRTC Server
 
 For µStreamer to share the video stream with the µStreamer Janus plugin, µStreamer must run with the following command-line flags:
@@ -111,13 +122,14 @@ The client-side JavaScript application uses the following control flow:
 1. The client instructs the Janus server to attach the µStreamer Janus plugin.
 1. On success, the client obtains a plugin handle through which it can send requests directly to the µStreamer Janus plugin. The client processes responses via the `attach` callbacks:
    - `onmessage` for general messages
-   - `onremotetrack` for the H.264 video stream
+   - `onremotetrack` for the H.264 video stream and (optionally) an Opus audio stream
 1. The client issues a `watch` request to the µStreamer Janus plugin, which initiates the H.264 stream in the plugin itself.
    - It takes a few seconds for uStreamer's video stream to become available to Janus. The first `watch` request may fail, so the client must retry the `watch` request.
 1. The client and server negotiate the underlying parameters of the WebRTC session. This procedure is called JavaScript Session Establishment Protocol (JSEP). The server makes a `jsepOffer` to the client, and the client responds with a `jsepAnswer`.
 1. The client issues a `start` request to the µStreamer Janus plugin to indicate that the client wants to begin consuming the video stream.
-1. The µStreamer Janus plugin delivers the H.264 video stream to the client via WebRTC.
-1. The Janus client library invokes the `onremotetrack` callback. The client attaches the video stream to the `<video>` element, rendering the video stream in the browser window.
+1. The µStreamer Janus plugin delivers the H.264 video stream and (optionally) an Opus audio stream to the client via WebRTC.
+1. The Janus client library invokes the `onremotetrack` callback with the video stream. The client attaches the video stream to the `<video>` element, rendering the video stream in the browser window.
+1. (if an audio track is available) The Janus client library invokes the `onremotetrack` callback with the Opus audio stream. The client adds the audio stream to the `<video>` element, rendering the audio in the browser window.
 
 ### Sample Code
 
@@ -176,7 +188,7 @@ The client-side JavaScript application uses the following control flow:
         // successfully.
         success: function (pluginHandle) {
           uStreamerPluginHandle = pluginHandle;
-          // Instruct the µStreamer Janus plugin to initiate the video stream.
+          // Instruct the µStreamer Janus plugin to initiate streaming.
           uStreamerPluginHandle.send({ message: { request: "watch" } });
         },
 
@@ -211,16 +223,17 @@ The client-side JavaScript application uses the following control flow:
           }
         },
 
-        // Callback function, for when the video stream arrives.
+        // Callback function, for when a media stream arrives.
         onremotetrack: function (mediaStreamTrack, mediaId, isAdded) {
           if (isAdded) {
             // Attach the received media track to the video element. Cloning the
             // mediaStreamTrack creates a new object with a distinct, globally
             // unique stream identifier.
             const videoElement = document.getElementById("webrtc-output");
-            const stream = new MediaStream();
-            stream.addTrack(mediaStreamTrack.clone());
-            videoElement.srcObject = stream;
+            if (videoElement.srcObject === null) {
+              videoElement.srcObject = new MediaStream();
+            }
+            videoElement.srcObject.addTrack(mediaStreamTrack.clone());
           }
         },
       });

man/ustreamer-dump.1

@@ -1,6 +1,6 @@
 .\" Manpage for ustreamer-dump.
 .\" Open an issue or pull request to https://github.com/pikvm/ustreamer to correct errors or typos
-.TH USTREAMER-DUMP 1 "version 5.24" "January 2021"
+.TH USTREAMER-DUMP 1 "version 5.25" "January 2021"
 
 .SH NAME
 ustreamer-dump \- Dump uStreamer's memory sink to file

man/ustreamer.1

@@ -1,6 +1,6 @@
 .\" Manpage for ustreamer.
 .\" Open an issue or pull request to https://github.com/pikvm/ustreamer to correct errors or typos
-.TH USTREAMER 1 "version 5.24" "November 2020"
+.TH USTREAMER 1 "version 5.25" "November 2020"
 
 .SH NAME
 ustreamer \- stream MJPEG video from any V4L2 device to the network

pkg/arch/PKGBUILD

@@ -3,7 +3,7 @@
 
 
 pkgname=ustreamer
-pkgver=5.24
+pkgver=5.25
 pkgrel=1
 pkgdesc="Lightweight and fast MJPEG-HTTP streamer"
 url="https://github.com/pikvm/ustreamer"

pkg/docker/entry.sh

@@ -2,7 +2,7 @@
 
 set -e
 
-[ -z "$NO_EDID" ] && {
+[ -n "$EDID" ] && {
 	[ -n "$EDID_HEX" ] && echo "$EDID_HEX" > /edid.hex
 	while true; do
 		v4l2-ctl --device=/dev/video0 --set-edid=file=/edid.hex --fix-edid-checksums --info-edid && break

pkg/openwrt/Makefile

@@ -6,7 +6,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ustreamer
-PKG_VERSION:=5.24
+PKG_VERSION:=5.25
 PKG_RELEASE:=1
 PKG_MAINTAINER:=Maxim Devaev <mdevaev@gmail.com>
 

python/setup.py

@@ -17,7 +17,7 @@ def _find_sources(suffix: str) -> list[str]:
 if __name__ == "__main__":
     setup(
         name="ustreamer",
-        version="5.24",
+        version="5.25",
         description="uStreamer tools",
         author="Maxim Devaev",
         author_email="mdevaev@gmail.com",

src/libs/const.h

@@ -23,7 +23,7 @@
 #pragma once
 
 #define US_VERSION_MAJOR 5
-#define US_VERSION_MINOR 24
+#define US_VERSION_MINOR 25
 
 #define US_MAKE_VERSION2(_major, _minor) #_major "." #_minor
 #define US_MAKE_VERSION1(_major, _minor) US_MAKE_VERSION2(_major, _minor)

src/ustreamer/m2m.c

@@ -220,7 +220,11 @@ static void _m2m_encoder_prepare(us_m2m_encoder_s *enc, const us_frame_s *frame)
 		fmt.fmt.pix_mp.colorspace = V4L2_COLORSPACE_DEFAULT;
 		fmt.fmt.pix_mp.num_planes = 1;
 		// fmt.fmt.pix_mp.plane_fmt[0].bytesperline = 0;
-		// fmt.fmt.pix_mp.plane_fmt[0].sizeimage = 512 << 10;
+		if (enc->output_format == V4L2_PIX_FMT_H264) {
+			// https://github.com/pikvm/ustreamer/issues/169
+			// https://github.com/raspberrypi/linux/pull/5232
+			fmt.fmt.pix_mp.plane_fmt[0].sizeimage = (1024 + 512) << 10; // 1.5Mb
+		}
 		_E_LOG_DEBUG("Configuring OUTPUT format ...");
 		_E_XIOCTL(VIDIOC_S_FMT, &fmt, "Can't set OUTPUT format");
 		if (fmt.fmt.pix_mp.pixelformat != enc->output_format) {