Bump version: 5.45 → 5.46

.bumpversion.cfg

@@ -1,7 +1,7 @@
 [bumpversion]
 commit = True
 tag = True
-current_version = 5.45
+current_version = 5.46
 parse = (?P<major>\d+)\.(?P<minor>\d+)
 serialize = 
 	{major}.{minor}

README.md

@@ -47,15 +47,13 @@ You need to download the µStreamer onto your system and build it from the sourc
 You'll need  ```make```, ```gcc```, ```libevent``` with ```pthreads``` support, ```libjpeg9```/```libjpeg-turbo``` and ```libbsd``` (only for Linux).
 
 * Arch: `sudo pacman -S libevent libjpeg-turbo libutil-linux libbsd`.
-* Raspbian: `sudo apt install libevent-dev libjpeg9-dev libbsd-dev`. Add `libgpiod-dev` for `WITH_GPIO=1` and `libsystemd-dev` for `WITH_SYSTEMD=1` and `libasound2-dev libspeex-dev libspeexdsp-dev libopus-dev` for `WITH_JANUS=1`.
+* Raspberry OS Bullseye: `sudo apt install libevent-dev libjpeg62-turbo libbsd-dev`. Add `libgpiod-dev` for `WITH_GPIO=1` and `libsystemd-dev` for `WITH_SYSTEMD=1` and `libasound2-dev libspeex-dev libspeexdsp-dev libopus-dev` for `WITH_JANUS=1`.
+* Raspberry OS Bookworm: same as previous but replace `libjpeg62-turbo` to `libjpeg62-turbo-dev`.
 * Debian/Ubuntu: `sudo apt install build-essential libevent-dev libjpeg-dev libbsd-dev`.
 * Alpine: `sudo apk add libevent-dev libbsd-dev libjpeg-turbo-dev musl-dev`. Build with `WITH_PTHREAD_NP=0`.
 
 To enable GPIO support install [libgpiod](https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/about) and pass option ```WITH_GPIO=1```. If the compiler reports about a missing function ```pthread_get_name_np()``` (or similar), add option ```WITH_PTHREAD_NP=0``` (it's enabled by default). For the similar error with ```setproctitle()``` add option ```WITH_SETPROCTITLE=0```.
 
-> **Note**
-> Raspian: In case your version of Raspian is too old for there to be a libjpeg9 package, use `libjpeg8-dev` instead: `E: Package 'libjpeg9-dev' has no installation candidate`.
-
 ### Make
 The most convenient process is to clone the µStreamer Git repository onto your system. If you don't have Git installed and don't want to install it either, you can download and unzip the sources from GitHub using `wget https://github.com/pikvm/ustreamer/archive/refs/heads/master.zip`.
 
@@ -156,9 +154,10 @@ Add `-e EDID=1` to set HDMI EDID before starting ustreamer. Use together with `-
 Example usage for the Raspberry Pi v3 camera (required `libcamerify` which is located in `libcamera-tools` on Raspbian):
 ```
 $ sudo modprobe bcm2835-v4l2
-$ libcamerify ./ustreamer --host :: -e m2m-image
+$ libcamerify ./ustreamer --host :: --encoder=m2m-image
 ```
 
+For v2 camera you can use the same trick with `libcamerify` but enable legacy camera mode in `raspi-config`.
 
 Example usage for the Raspberry Pi v1 camera:
 ```

docs/youtube.md

@@ -0,0 +1,97 @@
+## Streaming to third party services
+
+This method provides the ability of streaming a USB Webcam and include audio to large audiences.
+It uses to two machines. One is a Raspberry Pi and the other a more capable machine to performance
+the encoding of the video and audio that is streamed to the third party service such as YouTube.
+
+Another benefit of using a browser (http stream) is the video can have overlays add in the custom ustreamer webpage.
+For example a cron process that retrieves weather information and updates a file to include on the page, announcements,
+or other creative ideas. The audio stream can also be something other than the webcam mic (music, voice files, etc.)
+and easily changed on the second machine setup. In the following example filtering is applied in ffmpeg to
+improve the sound of the webcam mic making vocals clearer and more intelligible.
+
+* Machine 1:
+    * USB webcam on the machine (Pi for example) running ustreamer (video) and VLC (audio). Remember to make any needed firewall changes if machine 2 is on a separate network so it can reach the ports for the video and audio.
+    * To stream audio from the Pi.
+        ```
+        /usr/bin/vlc -I dummy -vvv alsa://hw:2,0 --sout #transcode{acodec=mp3,ab=128}:standard{access=http,mux=ts,dst=:[PickAPort}
+        ```
+
+* Machine 2:
+    * On a more capable box run the video stream in a browser using ffmpeg to combine the video (browser) and audio and stream to YouTube or other services. In this example a VM with two virtual monitors running the browser full screen one of the monitors is used.
+
+Script to stream the combination to YouTube:
+```bash
+#!/bin/bash
+KEY=$1
+echo
+echo Cleanup -------------------------------------------------
+source live-yt.key
+killall -9 ffmpeg
+killall -9 chromium
+sleep 3
+
+echo Setup General--------------------------------------------
+cd /home/[USER]
+rm -f nohup.out
+export DISPLAY=:0.0
+export $(dbus-launch)
+
+echo Setup Chromium-------------------------------------------
+CHROMIUM_TEMP=/home/{USER]/tmp/chromium
+rm -rf $CHROMIUM_TEMP.bak
+mv $CHROMIUM_TEMP $CHROMIUM_TEMP.bak
+mkdir -p $CHROMIUM_TEMP
+
+echo Start Chromium ------------------------------------------
+nohup /usr/lib/chromium/chromium \
+    --new-window "http://[ustreamerURL]" \
+    --start-fullscreen \
+    --disable \
+    --disable-translate \
+    --disable-infobars \
+    --disable-suggestions-service \
+    --disable-save-password-bubble \
+    --disable-new-tab-first-run \
+    --disable-session-crashed-bubble \
+    --disable-bundled-ppapi-flash  \
+    --disable-gpu \
+    --enable-javascript \
+    --enable-user-scripts \
+    --disk-cache-dir=$CHROMIUM_TEMP/cache/ustreamer/ \
+    --user-data-dir=$CHROMIUM_TEMP/user_data/ustreamer/ \
+    --window-position=1440,12 \
+     >/dev/null 2>&1 &
+sleep 5
+
+echo Start FFMpeg---------------------------------------------
+nohup /usr/bin/ffmpeg \
+    -loglevel level+warning \
+    -thread_queue_size 512 \
+    -framerate 30 \
+    -f x11grab \
+    -s 1920x1080 \
+    -probesize 42M \
+    -i :0.0+1024,0 \
+    -i http://[VLCaudioURL] \
+    -filter:a "volume=10, highpass=f=300, lowpass=f=2800" \
+    -c:v libx264 \
+    -pix_fmt yuv420p \
+    -g 60 \
+    -b:v 2500k \
+    -c:a libmp3lame \
+    -ar 44100 \
+    -b:a 32k \
+    -preset ultrafast \
+    -maxrate 5000k \
+    -bufsize 2500k \
+    -preset ultrafast \
+    -flvflags no_duration_filesize  \
+    -f flv "rtmp://a.rtmp.youtube.com/live2/$KEY" \
+     >/home/{USER]/ff-audio.log 2>&1 &
+
+echo Done ----------------------------------------------------
+echo
+```
+
+*PS: Recipe by David Klippel*

janus/src/client.c

@@ -38,7 +38,7 @@ us_janus_client_s *us_janus_client_init(janus_callbacks *gw, janus_plugin_sessio
 
 	atomic_init(&client->stop, false);
 
-	client->video_queue = us_queue_init(1024);
+	client->video_queue = us_queue_init(2048);
 	US_THREAD_CREATE(client->video_tid, _video_thread, client);
 
 	client->audio_queue = us_queue_init(64);

man/ustreamer-dump.1

@@ -1,6 +1,6 @@
 .\" Manpage for ustreamer-dump.
 .\" Open an issue or pull request to https://github.com/pikvm/ustreamer to correct errors or typos
-.TH USTREAMER-DUMP 1 "version 5.45" "January 2021"
+.TH USTREAMER-DUMP 1 "version 5.46" "January 2021"
 
 .SH NAME
 ustreamer-dump \- Dump uStreamer's memory sink to file

man/ustreamer.1

@@ -1,6 +1,6 @@
 .\" Manpage for ustreamer.
 .\" Open an issue or pull request to https://github.com/pikvm/ustreamer to correct errors or typos
-.TH USTREAMER 1 "version 5.45" "November 2020"
+.TH USTREAMER 1 "version 5.46" "November 2020"
 
 .SH NAME
 ustreamer \- stream MJPEG video from any V4L2 device to the network

pkg/arch/PKGBUILD

@@ -3,7 +3,7 @@
 
 
 pkgname=ustreamer
-pkgver=5.45
+pkgver=5.46
 pkgrel=1
 pkgdesc="Lightweight and fast MJPEG-HTTP streamer"
 url="https://github.com/pikvm/ustreamer"

pkg/openwrt/Makefile

@@ -6,7 +6,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ustreamer
-PKG_VERSION:=5.45
+PKG_VERSION:=5.46
 PKG_RELEASE:=1
 PKG_MAINTAINER:=Maxim Devaev <mdevaev@gmail.com>
 

python/setup.py

@@ -17,7 +17,7 @@ def _find_sources(suffix: str) -> list[str]:
 if __name__ == "__main__":
     setup(
         name="ustreamer",
-        version="5.45",
+        version="5.46",
         description="uStreamer tools",
         author="Maxim Devaev",
         author_email="mdevaev@gmail.com",

src/libs/const.h

@@ -23,7 +23,7 @@
 #pragma once
 
 #define US_VERSION_MAJOR 5
-#define US_VERSION_MINOR 45
+#define US_VERSION_MINOR 46
 
 #define US_MAKE_VERSION2(_major, _minor) #_major "." #_minor
 #define US_MAKE_VERSION1(_major, _minor) US_MAKE_VERSION2(_major, _minor)